• 7 FUNCTION DIGITAL MULTIMETER 69096 OPERATING INSTRUCTIONS Visit our Web site at REV 12a Copyright 2011 by Harbor Freight Tools. All rights reserved. © ® No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. • Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Warnings continued on page 3. SKU 69096 For replacement parts, please call 1-800-444-3353. • Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not operate properly. SKU 69096 For replacement parts, please call 1-800-444-3353. • Do not test voltage on AC circuits higher than 750 volts. Do not test voltage on DC circuits higher than 1000 volts.

No portion of this manual or any artwork contained herein may be reproduced in any. SKU 69096 For replacement parts, please call 1-800-444-3353.

Do not test current on circuits higher than 10 amps. SKU 69096 For replacement parts, please call 1-800-444-3353. • Measure DC conductors carrying up to 1000 VDC. Turn the Range Selector Switch to 1000 DCV setting. Follow the directions above under “AC Voltage Measurements”, only use the DC settings instead. SKU 69096 For replacement parts, please call 1-800-444-3353.

• Plug the red Test Lead into the VΩmA (Center) Jack. Oblozhka zhurnala forbs dlya fotoshopa. Plug the black Test Lead into the Com (Bottom) Jack. Switch the Multimeter ON. Connect the red probe to the anode of the diode and the black to the cathode.

SKU 69096 For replacement parts, please call 1-800-444-3353. • Pull battery/fuse out of unit and replace with the same. (9V battery or 500mA/250V fast-acting fuse) Replace cover and retighten screws. NOTE: No replacement parts are available for this tool. SKU 69096 For replacement parts, please call 1-800-444-3353.